Circular regulating fire damper BSKC6R

Bevent Rasch has developed a fire damper, fire class EI60/EI60S with regulating actuator. This means it is possible to regulate the air flow from 0-100% with a control signal 2-10V, use it as an adjustment damper or boosting damper while providing complete protection against the spread of combustion gases.

Quick facts

  • Fire resistance class EI60/EI60S
  • Sizes from 100 mm to 630 mm
  • Prefitted safety actuator 24V or 230V
  • Easy flow regulation
  • Low weight
  • Easy installation
  • Available in MagiCAD
  • CE-marked building product according to 15650:2010
CE

Use

Dampers in combination with walls or joists for fire-sectioning of heating, ventilation and air conditioning installations in buildings. In accordance with the harmonised European Standard EN 15650:2010. Smoke spread is prevented when the damper system design in accordance with the associated documentation, assembly and fitting instructions is used in combination with smoke detectors and the MRB (or equivalent) monitoring system. No further measures against the spread of smoke are required.

Design

The regulating fire/combustion gas damper is supplied prepared for external insulation. The control signal can come from e.g. room controllers, air quality sensors, or other devices that give a 2-10V DC output signal. The actuator provides an actual value signal of 2-10V DC depending on the damper position. In the event of a power failure, the damper closes with the actuator’s spring.

Specifications

Accessories

RCTU

Damper module

RCRS

Control unit for regulating dampers

RCRD

Room detector

RCKD

Duct detector

×