rcrd

FENIX4

Monitoring system FENIX4

FENIX is the next generation system for monitoring fire dampers.

Quick facts

  • For monitoring up to 16 fire dampers
  • Also manages 0-10 V (regulating) fire dampers
  • Dynamic troubleshooting screens on the interactive touch display with action proposals for each potential fault
  • Automatic detection of connected dampers and smoke detector circuits
  • Selectable language Swedish/English
  • Easy to expand the system with slave unit FENIX+
  • Simple zoning of fire compartments
  • Modbus TCP / BACnet IP

FENIX2

Monitoring system FENIX2

FENIX is the next generation system for monitoring fire dampers.

Quick facts

  • For monitoring up to 2 fire dampers
  • Also manages 0-10 V (regulating) fire dampers
  • Dynamic troubleshooting screens on the interactive touch display with action proposals for each potential fault
  • Automatic detection of connected dampers and smoke detector circuits
  • Selectable language Swedish/English
  • Modbus TCP / BACnet IP

RABC

Circular fire damper RABC

Quick facts

  • Fire resistance class E60/E120S
  • Sizes from 100 mm to 630 mm
  • Prefitted safety actuator 24V or 230V
  • Installation in ducts
  • Available in MagiCAD
  • CE-marked building product according to 15650:2010

BSKC6

Circular fire damper BSKC6

Damper in combination with walls or floor systems for fire separation of heating, ventilation and air conditioning installations in buildings.

Quick facts

  • Fire resistance class EI60/EI60S
  • Sizes from 100 mm to 630 mm
  • Prefitted safety actuator 24V or 230V
  • Low weight
  • Easy installation
  • CE-marked building product according to 15650:2010
  • Available in MagiCAD

RABCR

Circular modulating fire damper RABCR

Bevent Rasch has developed a fire damper E60/E120-S with modulating actuator. This means the air flow can be adjusted with the damper blade angle 0-100% via input signal 2-10 V. It can also be used as adjustment damper or control damper and have a complete fire function at the same time.

Quick facts

  • Fire resistance class E60 / E120S
  • Full protection against the spread of combustion gas
  • Sizes from 100 mm to 630 mm
  • Prefitted regulating safety actuator 24V
  • Installation in ducts
  • Easy regulation of flow
  • Available in MagiCAD
  • CE-marked building product according to 15650:2010

BSKC6R

Circular regulating fire damper BSKC6R

Bevent Rasch has developed a fire damper, fire class EI60/EI60S with regulating actuator. This means it is possible to regulate the air flow from 0-100% with a control signal 2-10V, use it as an adjustment damper or boosting damper while providing complete protection against the spread of combustion gases.

Quick facts

  • Fire resistance class EI60/EI60S
  • Sizes from 100 mm to 630 mm
  • Prefitted safety actuator 24V or 230V
  • Easy flow regulation
  • Low weight
  • Easy installation
  • Available in MagiCAD
  • CE-marked building product according to 15650:2010

RABC-VAP

Circular fire damper RABC-VAP

Bevent Rasch has developed a fire damper for fire resistance class E60 / E120S which is used for constant pressure retention in all types of ventilation plants whilst providing full protection against the spread of smoke.

Quick facts

  • Fire resistance class E60 / E120S
  • Complete protection against spread of smoke
  • Sizes from 100 mm to 630 mm
  • Fitted regulating safety actuator 24V
  • Duct mounted
  • Easy constant pressure retention
  • Available in MagiCAD
  • CE-marked building product in accordance with 15650:2010

RABR

Rectangular fire damper RABR

Quick facts

  • Fire resistance class E60S / E90S / E120S
  • Sizes from 200 x 200 mm to 1500 x 1500 mm
  • Prefitted safety actuator 24 V or 230 V
  • Slip joint connection or Flange connection
  • Installation in duct or against wall
  • Available in MagiCAD
  • CE-marked building product in accordance with 15650:2010

RCDU2

Control unit RCDU2

The RCDU2 is an encapsulated microprocessor-based, intelligent, self-monitoring control unit for connecting up to 2 dampers and 2 detectors.

Quick facts

  • Up to 2 dampers and 2 smoke detectors
  • Indicators for each individual damper
  • Optional external incoming alarm
  • Alternating relay contacts for both main alarm and dirty detector
  • Integrated transformer from 230 V to 24 V for powering actuators

BSKC6-VAP

Circular fire damper and constant pressure damper BSKC6-VAP

Bevent Rasch has developed a fire damper in fire resistance class EI60 / EI60S which is also used for constant pressure retention in all types of ventilation plants whilst providing full protection against the spread of smoke.

Quick facts

  • Fire resistance class EI60/EI60S
  • Sizes from 100 mm to 630 mm
  • Prefitted safety actuator 24V
  • Easy constant pressure
  • Low weight
  • Easy installation
  • Available in MagiCAD
  • CE-marked building product according to 15650:2010
×