brtg

DELTA-AH

Exhaust Air Cowl DELTA-AH

DELTA-AH is a exhaust air cowl for use in comfort and industrial facilities. DELTA-AH is designed for a low pressure drop in combination with very good water separation.

  • Sizes for flows from 100 l/s to 15.000 l/s
  • Design similar to Intake Air Cowl DELTA-UH and Combination Cowl DELTA-KH
  • Water separation Class A according to EN 13030
  • Low pressure drop
  • Adjustable outlet as accessory
  • Integrated lifting points
  • Available in MagiCAD

DELTA-AD

Exhaust Air Cowl DELTA-AD

DELTA-AD is an exhaust air cowl with a modern design for use in comfort and industrial facilities. DELTA-AD is designed for a low pressure drop in combination with documented good water separation.

  • Sizes for flows from 100 l/s to 8000 l/s
  • Design similar to intake air cowl DELTA-UD and combination cowl DELTA-KD
  • Water separation class A according to EN13030
  • Very low pressure drop
  • Integrated lifting points
  • Available in MagiCAD

BRTE (Exhaust Air)

Intake or Exhaust Air Cowl BRTE

BRTE is an air cowl for use in air conditioning and industrial plants. It can be used for either intake or exhaust air.

  • Can be customized
  • Suitable for Roof inlet BRTG
  • Galvanized sheet steel as standard
  • Available in powder coated finish corrosivity class C4
  • Available in MagiCAD

DELTA-UH

Intake Air Cowl DELTA-UH

Delta-UH is an intake air cowl for use in comfort and industrial facilities.

  • Sizes for flows from 100 l/s to 15.000 l/s
  • Design similar to Exhaust Air Cowl DELTA-AH and Combination Cowl DELTA-KH
  • Air intake well protected from rain
  • Integrated lifting points
  • Available in MagiCAD

DELTA-UD

Intake Air Cowl DELTA-UD

DELTA-UD is an outdoor air cowl with a modern design for use in comfort and industrial facilities. The outdoor air is taken in on the lower edge of the cowl.

  • Sizes for flows from 100 l/s to 9000 l/s
  • Design similar to exhaust air cowl DELTA-AD and combination cowl DELTA-KD
  • Fully rain protected intake
  • Integrated lifting points
  • Available in MagiCAD

BRLH (Exhaust Air)

Intake or Exhaust Air Cowl BRLH

BRLH is a circular ventilation cowl for use in comfort and industrial facilities. It can be used for intake or exhaust air.

  • Sizes from 125 mm to 1500 mm
  • Sizes 125-315 supplied with sleeve connection
  • Sizes 400 -1500 supplied with flange connection
  • Sizes 1250 and up equipped with eyebolts
  • Suitable for Roof inlet BRTG or BRTL
  • Galvanized sheet steel as standard
  • Available in powder coated finish corrosivity class C4
  • Can be supplied in many different custom versions

BRTH

Exhaust Air Cowl BRTH

BRTH is a discharge air cowl for use in comfort and industrial installations. BRTH features an internal water separator that prevents the entry of water when the exhaust fan is not in operation.

  • Sizes from 300 mm to 900 mm
  • Internal water deflector
  • Suits Roof inlet BRTG
  • Galvanized sheet steel as standard
  • Available in powder coated finish corrosivity class C4
  • Available in MagiCAD

BRSF

Exhaust Air Cowl BRSF

BRSF is a exhaust air cowl for use in comfort and industrial installations. It has a design that resembles a traditional chimney.

  • Sizes from 200 mm to 2000 mm
  • Design equal to Combination Cowl BRSK and Intake Air Cowl BRSI
  • Internal water deflector
  • Suits Roof inlet BRTG
  • Galvanized sheet steel as standard
  • Available in powder coated finish corrosivity class C4
  • The cowl can be customized
  • Available in MagiCAD

BRRA

Exhaust Air Cowl BRRA

BRRA is a exhaust air cowl with variable exhaust, which means the exhaust rate can be adjusted to current airflow.

  • Sizes from 600 mm to 1200 mm
  • Manual or automatic switchable
  • Control panel RCRA can be used for control
  • Suitable for Roof inlet BRTG
  • Galvanized sheet steel as standard
  • Available in powder coated finish corrosivity class C4
  • Can be supplied in many different custom versions

BRFH

Exhaust Air Cowl BRFH

BRFH is an exhaust air cowl for use in air conditioning and industrial plants.

  • Size from 200 mm to 1600 mm
  • Design equal to Combination Cowl BRKH and Intake Air Cowl BRIH
  • Internal water deflector
  • Suits Roof inlet BRTG
  • Galvanized sheet steel as standard
  • Available in powder coated finish corrosivity class C4
  • The cowl can be customized
  • Available in MagiCAD
×