brfl

BREA (Exhaust Air)

Intake or Exhaust Air Cowl BREA

BREA is circular air cowl for use in air conditioning and industrial plants. It can be used for either intake or exhaust air. The cowl is intended to be used when low pressure drop is wanted, e.g. for smoke evacuation.

  • Sizes from Ø100 mm to Ø1250 mm
  • Internal water deflector
  • Sizes 100-315 are fitted with a socket connection, sizes 400-1250 are fitted with flange connection
  • Compatible (with transition unit) with Roof inlet BRTG or BRTL
  • Galvanized sheet steel as standard
  • Available in powder coated finish corrosivity class C4
  • Available in MagiCAD

BRDJ

Exhaust Air Cowl BRDJ

BRDJ is a circular exhaust air cowl for use in comfort and industrial installations. The cowl design reduces the risk of particles falling back to ground level.

  • Sizes from Ø100 mm to Ø1250 mm
  • Internal water deflector
  • Sizes 100-315 is provided with a socket connection, Sizes 400-1250 is provided with a flange connection
  • Suits Roof inlet BRTG or BRTL (with transition unit BRÖG)
  • Galvanized sheet steel as standard
  • Available in powder coated finish corrosivity class C4
  • Available in MagiCAD

BREA (Intake Air)

Intake or Exhaust Air Cowl BREA

BREA is circular air cowl for use in air conditioning and industrial plants. It can be used for either intake or exhaust air. The cowl is intended to be used when low pressure drop is wanted, e.g. for smoke evacuation.

  • Sizes from Ø100 mm to Ø1250 mm
  • Internal water deflector
  • Sizes 100-315 are fitted with a socket connection, sizes 400-1250 are fitted with flange connection
  • Compatible (with transition unit) with Roof inlet BRTG or BRTL
  • Galvanized sheet steel as standard
  • Available in powder coated finish corrosivity class C4
  • Available in MagiCAD

BRBA

Exhaust Air Cowl BRBA

BRBA is a circular exhaust air cowl designed to provide a high outlet velocity and large air flows. This reduces the risk for dust and impurities falling back to the ground level.

  • Sizes from Ø315 mm to Ø1500 mm
  • Internal water deflector
  • Size 315 is fitted with a socket connection, sizes 400-1500 are fitted with flange connection
  • Can be built with a transition which suits Roof inlet BRTG
  • Galvanized sheet steel as standard
  • Available in powder coated finish corrosivity class C4
  • The cowl can be customized
  • Available in MagiCAD
  • Size 1500 is supplied in a split version

BRTG

Roof Inlet BRTG

BRTG is intended for the installation of rain cowls and roof fans.

  • Sizes from 3 to 21
  • 50 mm insulation on the inside as standard, corresponding to fire class EI30 and with cleanable surface coating Protec
  • Can be supplied with 100 mm internal insulation corresponding to fire class EI60, or with full sheet metal inside.
  • Standard heights: 800, 1000, 1200, 1500 mm (can be customized)
  • Lifting fittings mounted at factory from size 10.
  • Slip joint connection at the bottom
  • Two attached scales are included for adaption to roof pitch.
  • The roof inlet can, from size 6, be supplemented with sound reduction baffles.
  • Can be ordered in optional sizes, in both square and rectangular versions and also in an extended version.
  • Available in MagiCAD

×